ASTM D4647-2006 用针孔试验做分散粘土识别和分类的标准试验方法

时间:2024-05-05 11:23:36 来源: 标准资料网 作者:标准资料网 阅读:9398
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforIdentificationandClassificationofDispersiveClaySoilsbythePinholeTest
【原文标准名称】:用针孔试验做分散粘土识别和分类的标准试验方法
【标准号】:ASTMD4647-2006
【标准状态】:现行
【国别】:
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D18.06
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:分类;识别;粘土;试验方法
【英文主题词】:clay;clay(dispersive);collodialerodibility;dispersibility;dispersivity;dispersion;dispersiveclays;erosion;pinhole;soils
【摘要】:1.1Thistestmethodpresentsadirect,qualitativemeasurementofthedispersibilityandconsequentcolloidalerodibilityofclaysoilsbycausingwatertoflowthroughasmallholepunchedinaspecimen.ThistestmethodiscomplementedbyTestMethodD4221.1.2Thistestmethodandthecriteriaforevaluatingtestdataarebaseduponresultsofseveralhundredtestsonsamplescollectedfromembankments,channels,andotherareaswhereclaysoilshaveerodedorresistederosioninnature(1).1.3Threealternativeproceduresforclassifyingthedispersibilityofclaysoilsareprovidedasfollows:1.3.1MethodAandMethodC,adaptedfromRef(1),classifysoilsintosixcategoriesofdispersivenessas:dispersibility(D1,D2),slighttomoderatelydispersive(ND4,ND3),andnondispersive(ND2,ND1).1.3.2MethodBclassifiessoilsintothreecategoriesofdispersivenessas:dispersibility(D),slightlydispersive(SD),andnondispersive(ND).1.4ThevaluesstatedinSIunitsaretoberegardedasthestandard.Thevaluesgiveninparenthesesareprovidedforinformationonly.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:P21
【国际标准分类号】:93_020
【页数】:11P.;A4
【正文语种】:


基本信息
标准名称:无气喷涂机
英文名称:Airless spray unit
中标分类: 机械 >> 通用机械与设备 >> 通用机械与设备综合
ICS分类: 机械制造 >> 表面处理和涂覆
替代情况:被JB/T 8695-2012代替
发布部门:机械工业部机喷射设备准化技术委员会
发布日期:1998-03-19
实施日期:1998-07-01
首发日期:1900-01-01
作废日期:2012-11-01
提出单位:机械工业部喷射设备标准化技术委员会
归口单位:机械工业部机喷射设备准化技术委员会
起草单位:中国船舶工业总公司重庆长江涂装机械厂、机械工业部合肥通用机械研究所
起草人:周长根、张明圣
出版日期:1998-07-01
页数:9 页
批文号:机械科[1998]291号
适用范围

JB/T 8695-1998 本标准规定了各种涂料、树脂、溶剂、胶粘剂等特殊介质喷涂或压送用无气喷涂机的技术要求,检验方法,检验规则,标志、包装、运输和储存等到要求。 本标准适用于气动型、电动型、内燃机等动力源驱动的无气喷涂机。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用机械与设备 通用机械与设备综合 机械制造 表面处理和涂覆
【英文标准名称】:JunctionBoxesforSwimmingPoolLightingFixtures
【原文标准名称】:游泳池照明装置用接线盒
【标准号】:ANSI/UL1241-1994
【标准状态】:作废
【国别】:美国
【发布日期】:1994
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:照明系统;分线盒;游泳池
【英文主题词】:lightingsystems;junctionboxes;swimmingpools
【摘要】:
【中国标准分类号】:K36
【国际标准分类号】:29_140_99
【页数】:
【正文语种】:英语